DIY Tap Handle Inserts – Dual Threaded 3/8″

$7.50 incl. GST

Want to make your own unique tap handles? But the thread type is strange and overseas prices are just $$$! KegLand now has the answer with these simplistic brass inserts.

All you’ll need is a 12.7mm (1/2″) Hole drilled into your handle (Pine, Red Gum, Oak, Cherry, Maple ect) Then screw in with a large flat screw driver.

It is important not to push down too hard if you’re going to using a screw driver, or wide drill bit. It will strip the thread. Let the piece cut into the wood. Ensure that it is straight.

Suits NukaTap and Intertap taps

2 in stock

Pay in 4 (interest-free instalments) is available for orders between $30 and $2,000. 2.8% processing fee applies.
SKU: KK162 Categories: ,

Description

Want to make your own unique tap handles? But the thread type is strange and overseas prices are just $$$! KegLand now has the answer with these simplistic brass inserts.

All you’ll need is a 12.7mm (1/2″) Hole drilled into your handle (Pine, Red Gum, Oak, Cherry, Maple ect) Then screw in with a large flat screw driver.

It is important not to push down too hard if you’re going to using a screw driver, or wide drill bit. It will strip the thread. Let the piece cut into the wood. Ensure that it is straight.

Suits NukaTap and Intertap taps

Additional information

Weight .03 kg

There are no reviews yet.

Write a Review

Be the first to review “DIY Tap Handle Inserts – Dual Threaded 3/8″”

Related products